86-21-58041299
Rm. 0301, No. 3, Lane 123, Shenmei Road, Zhoupu Town, Pudong New Dist., Shanghai, China (Mainland)
Shunan SA824 Water Proofing Exterior Wall Putty
· Easy to use, just mix it with water
· Excellent weather resistance
· Good application ability, easy to apply and polish
· Good water-resistant and water vapour transmission ability
· High adhesive strength
· Good match with substrate and finish coating
· ISO9001 quality management system
· Green building material certificate
JG/T229-2007
· Suitable substrates: cement mortar, concrete
· Exterior for building
· To be used for preparation of concrete, cement-lime and brick substrate before finishing.
· May be used for filling small cavities, cracks and voids up to 5 mm deep. After drying up, building façade may be painted. May be used for inside finishing as well, including in humid areas (bathrooms, saunas, kitchens, etc.)
Elec-mixer, Bucket, Trowel
· Clean the substrate until free from dust, oil, or any other stains
· When high temperature season or dry substrate, substrate should be wet one day before
· Put 8.25 liters clean water in a bucket. Gradually add one bag (25 kg) of powder into water
· Mix properly until homogeneous and lump-free
· Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes
· Apply the 1st coat of product onto the substrate. When the finish is dry, apply the 2nd coat. Each thickness is about 0.5 ~0.6 mm
Ensure a flat, smooth and pinhole free coating
· Normally, after 24 hours (depend on weather and substrate), polish the surface
After that, apply the finish coating
· Avoid rain, high temperature and frost
· Avoid direct sunlight or strong wind
· May cause serious damage to eyes
· May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
· Keep out of the reach of children
· Avoid breathing the dust
· In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
· Wear suitable protective clothing,gloves and eye/face protection
